Regulators

The PFCevo automatic power factor control unit has been designed to offer state-of-the-art functions for power factor compensation applications. Built with dedicated components and extremely compact, the PFCevo combines the modern design of the front panel with practical installation and the possibility of expansion from the rear, where one expansion module can be slotted. The LCD screen provides a clear and intuitive interface to the user.

 

Regulator PFC96EVO

Main features

 

  • Automatic power factor controller.
  • Flush-mount, standard 96x96mm housing.
  • Backlit LCD screen.
  • 5 relays, expandable to 7 max.
  • 4 navigation keys for function and settings.
  • Alarm messages in 6 languages.
  • Expansion bus modules:RS485, USB communications interface. Additional relay outputs.
  • High accuracy TRMS measurements.
  • Wide selection of electrical measures, including voltage and current THD with harmonic analysis up to 15th order.
  • Voltage input separated from power supply, suitable for VT connection in medium voltage applications.
  • Wide-range power supply (100-440VAC).
  • Front optical programming interface: galvanically isolated, high speed, waterproof, USB dongle compatible.
  • 2-level password protection for settings.
  • Backup copy of original commissioning settings.
  • Built-in temperature sensor.

Technical Characteristics

Supply
Rated voltage 100÷440 Vac 45÷66 Hz – 110÷250 Vdc
Power consumption/dissipation -3,5W – 9,5 VA
Immunity time for microbreakings <25 mS
Voltage inputs
Maximum rated voltage 600 Vac – 45÷66 Hz
Measuring method TRMS
Wiring mode Single-phase, two-phase, three-phase with or without neutral or balanced three-phase system
Current inputs
Rated current 1A or 5A
Measuring method True RMS
Overload capacity +20% Ie
Power consumption <0,6VA
Relay output: out 1-4
Contact type 4x1 NO + common contact
Rated current AC1-5A 250 Vac AC15-1,5A 440 Vac
Maximum current at contact common 10A
Relay output: out 5
Contact type 1 changeover
Rated current AC1-5A 250Vac AC15-1,5A 440Vac (only NO)
Insulation voltage
Rated insulation voltage 600 Vac
Rated impulse withstand voltage Uimp 9,5 KV
Ambient operating conditions
Operating temperature -20°C +60°C
Storage temperature -30°C +80°C
Connections
Terminal type Plug-in / removable
Cable cross section (min…max) 0,2…2,5 mm2 (24÷12 AWG)
Case
Version Flush mount
Material Polycarbonate
Protection degree IP54 on front – IP20 terminals
Peso 350 g
Certifications
Standards IEC/EN 61010-1, IEC/EN 61000-6-2
IEC/EN 61000-6-4 UL508 e CSA C22.2-N

Regulator PFC144EVO

Mail features

 

  • Flush-mount, standard 144x144mm housing.
  • Backlit LCD screen.
  • 8 relays, expandable to 12 max.
  • 5 navigation keys for function and settings.
  • Alarm messages in 6 languages.
  • Expansion bus modules: RS485, USB communications interface. Additional relay outputs.
  • High accuracy TRMS measurements
  • Wide selection of electrical measures, including voltage and current THD with harmonic analysis up to 15th order.
  • Voltage input separated from power supply, suitable for VT connection in medium voltage applications.
  • Wide-range power supply (100-440VAC).
  • Front optical programming interface: galvanically isolated, high speed, waterproof, USB dongle compatible.
  • 2-level password protection for settings
  • Backup copy of original commissioning settings.
  • Built-in temperature sensor.

Technical Characteristics

Supply
Rated voltage 100÷440 Vac 45÷66 Hz – 110÷250 Vdc
Power consumption/dissipation -2,5 W – 7,0 VA
Immunity time for microbreakings <25 mS
Voltage inputs
Maximum rated voltage 600 Vac 45÷66 Hz
Measuring method True RMS
Wiring mode Single-phase, two-phase, three-phase with or without neutral or balanced three-phase system
Current inputs
Rated current 1A o 5A
Measuring method True RMS
Overload capacity +20% Ie
Power consumption <0,6VA
Relay output: out 1-7
Contact type 7x1 NO + contact common
Rated current AC1-5A 250 Vac AC15-1,5A 440 Vac
Maximum current at contact common 10A
Relay output: out 8
Contact type 1 changeover
Rated current AC1-5A 250Vac AC15-1,5A 440Vac
Insulation voltage
Rated insulation voltage 600 Vac
Rated impulse withstand voltage Uimp 9,5 KV
Ambient operating conditions
Operating temperature -20°C +60°C
Storage temperature -30°C +80°C
Connections
Terminal type Plug-in / removable
Cable cross section (min…max) 0,2…2,5 mm2 (24÷12 AWG)
Case
Version flush mount
Material Polycarbonate
Protection degree IP65 on front with gasket – IP20 terminals
Weight 640 g
Certifications
Standards IEC/EN 61010-1, IEC/EN 61000-6-2
IEC/EN 61000-6-4 UL508 e CSA C22.2-N°14